2025/01/06
This series is suitable for driving power devices such as SiC, IGBTs and MOSFETs, and available in both automotive (AEC-Q100 compliant) and industrial variants.
2024/11/19
Industry-leading EMC performance helps automakers simplify design and certification procedures, accelerating the time-to-market of their products.
2024/11/13
NOVOSENSE Microelectronics and Continental Automotive Technologies are to collaborate on the development of automotive-grade sensors to advance safety in vehicle systems.
2024/11/13
Target applications include OBC/DC-DC converters, PTCs, automotive motor control, fuel cell and charging station current detection. On display at Electronica – stand B5.450
2024/11/05
NOVOSENSE launches a range of high-side switches for driving traditional resistive, inductive, and halogen lamp loads in automotive body control modules (BCM) as well as large capacitive loads commonly found in the first-level and second-level power distribution within zone control units (ZCU).
2024/10/15
Showcasing advanced 40V multi-channel half-bridge drivers, high-performance programmable stepper motor drivers, and precision automotive sensors.
2024/08/05
Through DigiKey's extensive global distribution network and strong market presence, NOVOSENSE will be able to extend its products to a broader customer base and expand its global reach.
2024/07/26
This is the second such report commissioned by NOVOSENSE, to inform the board and shareholders of our progress against its targets.
2024/07/18
Second annual independent audit highlights multiple enacted measures to improve environmental impact, business ethics, equity and staff welfare.
2024/06/26
2024/06/26
NOVOSENSE's NSD830x-Q1 is a series of multi-channel half-bridge automotive-grade driver chips. It includes NSD8308 (8-channel) and NSD8306 (6-channel), integrating multi-channel half-bridge driver and N-MOS power stage to support multiple load types.
2024/06/13
NOVOSENSE's new integrated current sensor chip NSM2311 has a primary impedance as low as 100μΩ and a continuous current capacity of up to 200A, meeting the reliability requirements of AEC-Q100.
2024/06/11
Highly integrated driver with dimming functionality addresses demands of latest dynamic vehicle lighting applications
2024/06/03
The NSD8381 is specially designed for stepper motor driver of headlight stepper motor, HUD adjustment motors, HVAC EXV(Electronic Expansion Valve) and flap motors , with excellent performance and stability.
2024/05/31
NOVOSENSE's temperature sensors adopt high-performance, high-reliability CMOS temperature measurement technology, featuring high accuracy over the full temperature range, high linearity, low power consumption and high integration.
2024/05/21
Highlights include isolated current sensors, transceivers and gate driver technologies that ensure reliability, safety, and performance.
.jpg)
2024/05/20
NSI7258 provides industry-leading voltage withstand capability and EMI performance to help improve the reliability and stability of high-voltage systems.
.jpg)
2024/05/20
NSIP605x series of cost-effective push-pull transformer drivers, consist of NSIP6051 with an output power of 1W and NSIP6055 with an output power of 5W.
2024/05/16
NOVOSENSE announced its participation in the Automotive Engineering Exposition 2024 YOKOHAMA, from May 22 to 24, at booth N62 in PACIFICO Yokohama, Japan.
2024/04/23
NOVOSENSE announced it will demonstrate the newest additions to its solutions in automotive at the Automotive World Korea from April 24 to 26.
2024/04/15
NOVOSENSE, a pioneering force in the automotive chips, recently unveiled several groundbreaking products aimed at enhancing performance, reliability, and efficiency in automotive applications.
2024/04/03
2024/03/26
NCA1462-Q1 supports higher data rate (>8Mbps) and more communication nodes; its VIO as low as 1.8V and high EMI/ESD performance helps engineers simplify system design and optimize system cost.
2024/03/25
From March 15 to 17, the 10th China EV100 Forum was held at the Diaoyutai State Guesthouse in Beijing.
2024/02/23
Support higher power density system designs and simplify peripheral circuits to reduce the size of system protection circuits by 60% compared to the traditional discrete scheme.
2024/02/07
NSOPA series can be widely used in automotive and industrial systems for signal conditioning of voltage, current, temperature and other signals.
2024/01/24
4-channel and 8-channel devices with integrated current limiting support bi-directional digital inputs
2024/01/22
High-reliability devices support speeds to 150Mbps and protection to 8kV
2024/01/18
NOVOSENSE has officially joined the Automotive Electronics Council as a member of the AEC Component Technical Committee.
2024/01/12
NOVOSENSE introduces the new NSM107x series of low-power Hall switches, providing high-precision digital position detection solutions for a wide range of industrial and consumer electronics applications.
.jpg)
2023/12/07
On December 5, VDE was invited to visit NOVOSENSE's Shanghai office and presented NOVOSENSE with the Premium Quality Award, which fully affirmed NOVOSENSE's outstanding achievements in the field of quality over the years.
2023/09/19
NOVOSENSE NSUC1610 integrates a Cortex M3 processor, power MOSFET and DAC. It supports a 4-wire LIN bus and dual-channel temperature sensor which can be used for power-side over temperature shutdown and low-voltage-side temperature detection inside the chip.
2023/08/08
NOVOSENSE has launched a new 1200V SiC diode series, designed for applications such as photovoltaics, energy storage, and charging.
2023/07/14
NOVOSENSE has launched 120V half-bridge driver NSD1224 series, which have 3A/-4A peak driver current capability, are integrated with high-voltage bootstrap diode, and are available in different versions including enabling, interlock and undervoltage protection, as well as various packages including SOP8, HSOP8, DFN10 and DFN8.
2023/02/06
NOVOSENSE announced that it would showcase technologies and products for automotive electronics solution at Automotive World 2023, one of the world’s leading exhibitions for the advanced automotive technologies.
2022/09/14
Ken Ye, Marketing Director of NOVOSENSE, accepted the interview from the media Elecfans.
2022/09/06
Wang Shengyang, founder, chairman and CEO of NOVOSENSE Microelectronics, was invited to attend the forum and deliver a keynote speech.
2022/08/26
From August 26 to 28, 2022, the World New Energy Vehicle Congress 2022 (WNEVC 2022) was held in Beijing and Hainan in a combination of online and offline ways.
2022/08/17
NOVOSENSE participated in the 2022 International IC & Component Exhibition and Conference (IIC) with its high-performance and high-reliability analog and mixed-signal chip portfolio.
2022/07/20
In the first half of 2022, NOVOSENSE (an analog and mixed signal chip design company) has released more than ten new products, which are widely used in automotive, industrial, information and communication and consumer electronics fields.
2022/04/24
The NSI1312x series of isolated voltage sampling chips newly launched by NOVOSENSE support positive and negative voltage input and high impedance input
2022/03/10
The new NSM2015 / NSM2016 Hall-effect current sensor chip launched by NOVOSENSE is a fully integrated high isolation current sensor solution with extremely low primary side conduction resistance
2021/08/09
NOVOSENSE has launched the new universal CAN port chip --NCA1042, isolation CAN port chip --NSI1042
2021/04/18
From April 14 to 16, electronica China 2021 was held in Shanghai New International Expo Center.
2020/12/05
The first South China electronica China was held in Shenzhen World Exhibition & Convention Center on November 3-5.
2020/09/27
From September 23 to 25, with the theme of "Intelligent Sensing, Enabling a Better Life", NOVOSENSE brought a variety of products and solutions to SENSOR CHINA 2020.
